PCI Configuration
Information about all the PCI devices in the system is presented in
Display System Configuration when you select PCI Configuration and press [Enter].
The following information is displayed for each PCI device:
- Device Name: the name and model of the device as recorded
in the device’s firmware.
- Device Type: the device type lists the function of the
device in the system.
- Physical Slot: the physical slot lists the actual PCI
slot number to which the device is attached.
- Revision: the revision level of the device.
PCI Device Detail
You can also get additional detail about any of the PCI devices listed by using the following
procedure:
- Press [Enter] to allow selection in the device list.
- Select the device about which you want additional detail.
- Press [Enter], and the detail is displayed.
- Press [Escape] to return to the table of PCI devices.
The following information is displayed for the selected PCI device:
- Bus Number: The bus number is the virtual PCI bus number.
- Function Number: The function number represents the
number assigned to a particular function on a multifunction device. For example,
a combination Ethernet/SCSI controller would be listed twice, with the first function
listed as function 0 and the other function listed as function 1.
- Device Number: The device number is the PCI bus device number.
- Configuration Space Header: The configuration
space header displays the information in the selected device’s PCI configuration space.